Tektite MotorSnap

Every bullet connector, solder joint, or covered WAGO connector is a potential extra point of failure that you can’t easily diagnose. Additionally, extra coiled up wire adds resistance, wasting energy to heat that could be going to your motors. With Tektite MotorSnap you just cut wire to the right length and connect the ends straight to your motor, avoiding all potential points of failure. Since the wire doesn’t have any extra length, you minimize resistance, and you can use 16AWG wire which has less resistance. The silicone wire sold by Tektite is also more flexible and heat resistant than the PVC wire typically used.

NOT INCLUDED: MOTOR, WIRE
Buy pre-crimped 16AWG silicone wire: https://tektitebiz.com/product/jst-vh/
(or, see the description for items to crimp your own)
Demo: https://youtu.be/goUyWkmqYC4
Tutorial: https://youtu.be/bfGew2fLt_4
CAD: Onshape
Weight: 4.8g

The height is the same as a motor with the included cap, so it should fit into most mechanisms.

Have any questions? Join the Tektite Discord here and message in #motorsnap.